Differences

This shows you the differences between two versions of the page.

--- wiki:projector [2018/04/25 11:00] – admin
+++ wiki:projector [2018/04/26 08:04] (current) – admin
@@ Line 17: / Line 17: @@
   - Use the wall switch or remote to select **HDMI** as the Source. Do not connect any cables to your laptop, iPad or iPhone.
   - You should see Apple TV home screen on the projector screen.
-  - Ensure that your iOS device is on the UCSD-PROTECTED Wi-Fi network. On the iOS device, swipe up to reveal the Control Center. Tap the “AirPlay Mirroring” button. Select “keck” from the list. On your Apple device, enter the four-digit code that appears on the projector screen. You should be now connected. If the connection fails, cancel AirPlay and try to connect again. Note: You need to have iOS version 10.12 or higher on your Apple device for AirPlay to work.
+  - Ensure that your iOS device is on the UCSD-PROTECTED Wi-Fi network. On the iOS device, swipe up to reveal the Control Center. Tap the “AirPlay Mirroring” button. Select “Keck” from the list. On your Apple device, enter the four-digit code that appears on the projector screen. You should be now connected. If the connection fails, cancel AirPlay and try to connect again. Note: You need to have iOS version 10.12 or higher on your Apple device for AirPlay to work.
   - When you have finished using the projector, please turn it off by pressing the Power button on either the wall switch or the remote control.